| PRODUCTS |
| Pipe Machine Tools | Tube Machine Tools | ||||
|---|---|---|---|---|---|
| Clamshell pipe lathes | RA radial cutters | ||||
| Id mount end prep machines | Orbital clamshell cutters (new!) | ||||
| In-Situ Machine Tools | Vessel Seat Grinders | ||||
| Off-set mills | Oval manway grinder | ||||
| Hydraulic Drills | Hand hold grinder | ||||
| Refinery-drill | |||||
| Journal turning |
Controlled Bolting Systems |
||||
| Blind hole drilling / turning / welding | Hydraulic square drive wrenches | ||||
| Align boring / ID Welding | Sockets | ||||
| Hydraulic cassette wrenches | |||||
| Boiler & Heat Exchanger Service | Pneumatic nut runners | ||||
| Header stub & weld removal systems | Stud tension systems | ||||
| Water panel systems | |||||
| Torque control-rolling motors |
Hydraulic Maintenance Equipment |
||||
| Expanders | Hollow-rod pulling cylinders | ||||
| Tube cleaners | Multiple cylinder lifting systems | ||||
| Tube pullers | Flange spreaders | ||||
| Tube collapsing tools | Nut splitters | ||||
 |
 |
|||
| For cold cutting and weld joint bevelling Simultaneous sever and bevel upto 25mm wall thickness. Compound bevel angle reduces weldout time and heat input. Use in restricted spaces with as little as 120mm clearance. Minimises debris in downstream plant. Bevel exotic alloys with no HAZ |
||||
| Clamshell options: |
 |
|||
| Inter-changeable motors for restricted spaces. Od turning attachment. Match-boring attachment. Flange facing module. |
||||
 QD Bore bar |
 |
|||
| Portable line boring systems, range from 38mm to 1m
diameter. Precision blind hole boring heads up to 150 diameter x 300 deep. |
||||
 |
||||
| Od mount clamshell lathes can be used
for facing. (Units up available for hire in Australia) BU facers up to 3m diameter. Model BU 44 available for hire in Australia. |
||||
| Available up to 812mm diameter. 203mm model in Australia. |
||||
|
Portable mills |
 |
|||
| 3 axis offset mills with up to 1625mm
travel. Interchange heads. Inter-changeable drive motors. Adaptable to most applications go to our rental page for mill data sheets |
||||
 Mills & Drills |
||||
| Precision heavy Z-axis drills with
600mm-column height. Hydraulic drill up to 75mm diameter holes 300mm deep. Custom systems for stud removal. Pneumatic drill w/permanent magnetic base (see refinery drill) |
||||
 End prep machines End Prep End prep machines |
Pipe End Prep Machines (bore mount) |
 |
||
| Self aligning, Self
centering. Machines range from 12mm Id to 600mm Od. Machines suited to perform |
||||
|
||||
|
|
 |
|||
| Elbow mandrels allow bore
mounting in narrow area. Multi bevel heads with carbide inserts. Perform simultaneous bevel and membrane removal. Clad removal tool holders for Od machining. Header stub removal Weld release - or - wall reduction. |
||||
|
|
 |
|||
| Track saws for accurate
vertical and horizontal panel cutting. Membranes machine tool for notching. TS-400 pnuematic saw is 4Hp with 14" blade. Safe , Fast , Accurate |
||||
|
MSF |
 |
|||
|
|
Model MSF id mount range 22 to 304 diameter. | |||
|
|
Model MTF id mount range 50 to 420 diameter | |||
|
|
Model MFTF id mount range 130 to 508 diameter. | |||
|
||||
| Whether you need a simple
machine for occasional repairs or you contract to the open-cut
mines, all of our machines have features developed over years of use
in the field. Professional line boring systems have these features.
|
||||
 EV-2500 |
50-150mm Diameter 
Available with small |
|||
| MODEL EV-2500 Bar size: 1.75" Drive unit: 40x 13x 27cm Weight: 15kg 240V electric drive 15 to 175 rpm Ideal for fleet owners of professional services. Pass-Thru drive unit can be located anywhere on the bar. Automatic mechanical feed for accurate cuts and finish. Detachable motor for easy setup. Gear reduction for heavy cuts through weld metal. Heavy adjustable bearing supports attach with one bolt. |
||||
|
TM8X |
50-200mm Diameter 
Available with small |
|||
| MODEL TM-8X Bar size: 1.75" Drive: Hydraulic HPU: 240V 2.2Kw Drive unit: 43x 17x 27cm Weight: 24kg One man system for professional line boring services. Pass-Thru drive unit can be located anywhere on the bar. Automatic mechanical feed for accurate cuts and finish. Detachable motor for easy setup. Heavy adjustable bearing supports attach with one bolt. Interchangeable motors for optimum bar speeds and torque. Hydraulic power units made in Australia. |
||||
|
Little Ripper brochure LR-200 |
58-350mm Diameter  |
|||
| MODEL LITTLE RIPPER
LR-200 Bar size: 2.00" Drive: Hydraulic Feed: Variable / Mechanical HPU: 7.3Kw Drive unit: 22x 26x 18cm Weight: 12kg Premium professional Hydraulic line boring system. Gear drive for heavy intermittent cuts and high torque. "Quick-attach" motor to reduce weight. Available with small bar kit down to 32mm. Drive unit can be located anywhere on the bar or between bores. Variable mechanical feed unit can be located anywhere on the bar. Self-aligning X-Y adjustable drive mount and bar support bearings. 3.3kw hydraulic power unit with variable speed, remote control valve and low voltage pendant. |
||||
 |
38-400mm Diameter |
|||
| Drive:
12 Volt Feed: Adjustable step Size: 15x 23x 11cm Weight: 5kg Designed for portable line boring by portable line borers. Usable with any line bore system. same-set up in your bar bearings. Weld bores without bore machine. Remote pendant control. 2 meters. Weld and feed both directions. Quick nozzle access. 300mm feed and rigid at 2 meters. Use any wire feeder with your Mig-gun. Australian and US patents. |
||||
|
|
PDF Download'sFMT
facing head |
|||
| Collapsible facing head Adjustable support bearings FMT Boring bars 4, 6, 8, 10, 12ft Insert tool holders |
||||
|
 |
|||
Krais tube tools
|
Click here for brochure contact us for full |
|||
|
 |
|||
| Rental machines available |
contact us for full |
|||
|
|
 |
|||
| Automatic
continuous Tube pulling systems. Integrated roller extraction systems. High speed tube extractors |
Click here for brochure |
|||
 You will need the Adobe Reader to view the handouts and data sheets. Download the Reader here |
||||
|
|
||||
